Snake Plant – Dracaena Trifasciata

Dracaena trifasciata, still recognized as the snake plant, is among the most well-established and enduring kinds of plants for the home. It was until 2017 that it was segregated botanically in the group of Sansevieria trifasciata.

However, the correlations with typical Dracaena variations were too plentiful not to be recognized. The plant has blade-like, stiff leaves that range between six and eight feet high.

Snake plants differ in color but many are green-banded and have yellow borders. They are simple to cultivate and are usually practically immune to destruction. They are growing in extreme light or in the dark spaces of the home.

They do well in light indoors, however, the exposure to sunlight will enhance growth if we exposed them to only a couple of hours of direct sunlight. Repotting and planting are best done in spring.

There are 70 species under the genus Sansevieria. Sanseveria is likewise called mother-in-law’s tongue, snake plant, snake tongue, devil’s tongue, and bowstring hemp. There are a few quite-established types

If you are a serial houseplant eradicator, the snake plant could be the answer to all your worships because it’s virtually immortal.

The rugged horizontal markings across each leaf make a striped look resembling scales on a serpent’s back. Simultaneously in the wild, the snake plant experiences its surroundings with snakes and is identified flourishing in central Africa’s savannas, prairies, and woodland boundaries.

The most frequently encountered snake plant has golden yellow bars along each leaf margin, but the plant gets many shapes, colors, and forms, all uniformly tough. Its long, pointed leaves are likewise behind the malicious and sarcastic alias, ‘mother-in-law’s tongue.’

Accepted to many by its ancient Latin name, Sansevieria trifasciata, it was recently established in the Dracaena genus, hence the name “Dracaena Trifasciata” like the dragon tree, another attractive houseplant — still that’s where the resemblances end.

Dracaena Trifasciata May Clear The Air

The scientists examined how swiftly the ozone splits down into a nontoxic form. The plant-free room had 74.8 minutes for the ozone to fall below five ppb.

Though, in the Dracaena Trifasciata room, the ozone levels dropped below five ppb in roughly half that time – 46.3 minutes.

The alternative plants were approximately as efficient at cleaning the air, corresponding to the conclusions printed in Hort-Technology, a publication of the American Society for Horticultural Science.

How To Propagate Dracaena Trifasciata

There are three primary ways to propagate a snake plant from an existing specimen.
Utilizing the proper potting soil and container is essential for optimal propagation.
As a natural antifungal, cinnamon powder accelerates the healing of wounds.

Snake plants (Dracaena trifasciata) are renowned for their resilience, near-indestructibility, and writhing, sword-like leaves. This common houseplant thrives in various light situations, requires little water, and is simple to grow.

Plant propagation is the process of creating new plants from an original plant.

There are multiple ways to grow a snake plant, each with its own care instructions.
Quick hint: While snake plants are generally resistant to pests, pros recommend examining possible insects and fungi before propagation, as they can be transmitted to the new plant.

What You Require

• Garden secateurs or a serrated blade
• Potting soil, ideally a cactus/succulent blend
• A glass of room-temperature water or a tiny container with a drainage hole (preferably terra cotta)
• Use the proper materials

The key to effectively propagating and producing a new snake plant is selecting the proper soil. Pros concur on the need for well-draining soil, such as a cactus/succulent mix with added perlite.

Ensure that the soil is well-aerated and well-drained, and water the plants only when the first two to three inches of soil become dry.
Recommended is to use a terra cotta pot with a drainage hole for planting.

They are ideal for plants that are extremely susceptible to overwatering. They assist in wicking away moisture and preventing a range of problems associated with excess water, such as root rot.

Method 1: Division Of The Rhizome

If you wish to propagate an existing snake plant or if a buddy wishes to share their abundance of snake plants, you can divide the rhizomes. These underground portions of the plant resemble ginger or thick roots.

Pros suggest removing the plant from its pot and cutting the mass of dirt and roots in half using sharp garden shears (or a serrated knife if the plant is larger).

Each portion should contain at least three healthy, green rhizomes. Finally, place each new plant in the soil and water it until the water drains from the bottom of the container.

With the rhizome division method, it is unnecessary to propagate in a glass of water. This will cause their roots to rot. When there are no roots yet, you can cultivate a snake plant in a glass of water.

Method 2: Taking A Leaf’s Root

Try rooting a leaf if your snake plant is endowed with an abundance of healthy leaves. Clip the stem as near to the base as possible without causing damage to the plant’s roots or other leaves.

Next, place the cutting in a water-filled glass or container. The leaf should be submerged by no more than an inch or two, or around one-fourth of the leaf.

Place the jar out of direct sunlight or under a grow light, and change the water every few days.

Within three to four weeks, fresh roots will emerge from beneath the leaf. Once the roots reach around two inches in length, repot the new snake plant.

Method 3: Involves Rooting A Cutting

If you are ready to take a cutting of a healthy leaf from your snake plant, you can try the third way of propagation, which involves roots and cutting.

This is the same as the second way, but it skips a step. Plant the leaf-cutting directly into the soil, hydrate it, and allow it to grow.

Snake Plant Maintenance After Propagation

As for post-propagation care, the correct illumination can distinguish between a stagnant and a thriving snake plant. Even though snake plants are one of the more low-light tolerant plants, this is not their ideal environment.

To the astonishment of many, snake plants may flourish in a very sunny setting and, with any luck, even bloom!

Add cinnamon powder to the cut ends of your vegetables. Cinnamon accelerates the healing process and acts as a natural antifungal to help prevent future problems.

Typical Snake Plant Troubles

No plant parent wishes to see insect infections, but snake plants are susceptible to mealybugs and spider mite infections, which lead to weakening and dropping leaves.

Snake plants can still produce brown spots and are inclined to fungal issues such as southern blight and red leaf spots.

To avert this, make sure you’re not alone listening to your plant but noticing how its living conditions influence it in both good and negative aspects.

If you recognize your snake plant is ever roots bound, don’t fuss – they operate well that way unless their rhizomes or roots crack through any pots.

Last, if you’re a pet holder, it’s essential to recognize that these plants harm cats and dogs. They’re further unhealthy for humans and should be set aside from kids’ grasp.

Final Word

• If you wish to propagate a snake plant, various simple methods are available.
• To prevent root rot while dividing rhizomes or rooting cuttings, it is essential to use the proper potting soil and a planter with adequate drainage.
• Repotting your snake plant every two to three years will ensure its longevity.
• It is also the optimal time to propagate them once more.
• The top plants for a beginner’s garden
• The easiest-to-grow, easiest-to-buy houseplants are available online.
• Even if you don’t have a green thumb, this startup makes purchasing and maintaining gorgeous houseplants simple.

The best houseplants you can purchase online are sensationally simple to grow.