How Much Does It Cost to Pressure Wash a House? The Average Cost Per Square Foot

0
1100

How Much Does It Cost to Pressure Wash a House

Here’s an estimate of how much the powerwash house costs: The initial cost is based on the size and condition of the house. The frequency of cleaning is also based on the size and condition of the house. Additional expenses may be incurred if specific areas need extra attention.

You’ll also need to price your power washing job based on the square footage of the house, as well as the amount of time it will take to pressure wash it. Finally, find out how much pressure washing costs per hour; time to get a calculator in your hands!

Critical Factors In Actual Cost

1. How does pressure washing work?

2. What are the benefits of using water pressure washing?

3. The cost of water pressure washing a house

4. How much does pressure-washing a house per square foot cost?

Resources for Your Growing Business

Starting a pressure washing companies can be a great way to make extra money. The average cost per square foot to pressure wash a house is around $200-$600.

This means you’ll need the right equipment, supplies, and funds to cover the costs of detergent cleaner, garden hose, water, and Tarps® or sheets available in most home improvement stores.

Remember to wear gloves, a face mask, and protective clothing when doing pressure washing cleanup, as it can be safely done but still requires some effort!

Costs Involved

1. Measure the Space

Power Washing Business states that most pressure washing estimates are based on the area’s square ft or linear footage to be cleaned.

To determine the site’s conditions, it is best to visit the property in person to check exterior surfaces before sending an estimate.

If special services are required, or repairs are needed, ask the customer what exactly they want.

Square Footage

If you have a small area to cover, such as the roof or parking lot example, then it’s easy! You can multiply the length by the width and get your answer in square feet. However, if your project requires more than 100 sq ft of work on an entire house- most likely due to either Party asking nicely because they know what’s best (or not so much),

I recommend hiring someone with experience with large projects like this one – because there are some tricky angles where less precise measurements might come into play.

Linear Footage

When it comes to sanitizing a house, pressure washing is one of the most effective ways to achieve great results. However, before you start, you need to calculate how much square footage will be cleaned.

Next, determine the linear footage needed for each side of your house and any exterior obstructions like trees or fences. Add up this amount, and that’s your approximate cost per square foot for pressure washing!

2. Decide on a Pricing Strategy

Pressure washing services use three common pricing strategies for residential jobs:

  • Job size In square feet or linear feet, material acquisition
  • Paying by the hour ensures you get paid for every hour you work.
  • A flat rate pricing option is handy if you’re an experienced power washer.

Prices for different jobs and how rough surfaces affect prices are y variable costs (like changing oil and grease).best used when there aren’t man

Using this method, find the price per square foot and add your markup on top, earning more but requiring more expertise than simply looking at flat rates all day!

3. Price Based on the Project

There are also differences in rates based on the service. As a guide to estimate calculator of a power washing job, whether it’s a house or a parking lot, the following are some standard rates and avoid higher costs:

Houses

Pressure washing Brick House
Pressure washing Brick House

$90 – $275 flat rate for exterior

$0.75 – $1.25 per linear foot (single-story house)

$1.75 – $2.25 per linear foot (two-story house)

Gutters

Pressure washing gutter
Pressure washing gutter

$100: single story

$135: two floors

$200: three floors

Boats

Pressure washing Boat
Pressure washing Boat

$5 per linear foot: bottom only

$10 per linear foot: whole boat

Roofs

pressure washing of the roof
pressure washing of the roof

The roof cleaning costs are as follows;

0.20 cents per square foot

Double or triple the fee for roofs with steep pitches

Driveways and Sidewalks

pressure washing conrete sidewalk
pressure washing conrete sidewalk

$60 – $150 flat price (depends on size)

$0.08 – $0.14 per square foot

Fences, Decks, and Siding

pressure washing house siding
pressure washing house siding

$0.20 – $0.25 per square foot

Mobile Homes

Pressure washing mobile home
Pressure washing mobile home

There’s never a wrong time to pressure wash your mobile home – especially if you’re on a budget. Mobile homes are susceptible to mold and mildew, especially on vinyl siding surfaces.

$50 – $85 flat rate for a mobile home (depends on condition)

$80 – $100 flat rate for a double wide (depends on condition)

Commercial Cleaning

$0.08 -0.12 cents per square foot for basic surface cleaning

$75 for the standard dumpster and $150 for large

Parking Lots, Garages, and Drive-Thrus

$0.05 – $0.25 per square foot for parking lots and garage floors (depends on condition)

$10 – $20 per parking space

4. Estimate Materials and Overhead Costs

Chemicals for work on siding, fences, decks, and roofs come at an extra cost. For instance, it would cost $50 in chemicals to power wash a roof. Additionally, prices will vary based on whether you clean with tap or hot water to make your roof pressure washed.

According to Ultimate Washer, another expense you should unquestionably include in your estimations is overhead.

Let’s look at some total monthly costs in the context of a 30-hour paid work week. 

Loan for a vehicle: $400 or $3.33 an hour

The cost of car insurance: $125 or $1.04 an hour

The cost of cleaning supplies: $400 or $3.33 hourly

The cost of phone and internet: $150 or $1.25 an hour

Fuel: $500 per month or $4.17 an hour

Advertisement: $600 or $5.00 per hour

Keeping the equipment in good repair and fueling it: $10 an hour

Monthly office rent: $900 per month, $9 an hour (at your discretion)

The overhead costs alone are almost $40 per hour. As well as your salary ($29/hour at $60,000 per year) and money to invest in the company ($20,000 or $9.50 an hour).

As a result, your hourly rate increases to $78.50. Because you get paid only for 30 hours, you need to account for the 10 hours you spend on administrative tasks.

In a 40-hour work week, you should earn $3,200 if you round $78.50 up to $80.

You must earn $800 more. You’ll need to charge $26.66 more per hour if you divide $800 by 30 hours to get the total price.

5. Calculate the Total

Based on your square footage or linear footage, calculate the cost, considering overhead and materials.

Alternatively, you can select a flat rate from the list above.

Here’s an alternative strategy: ( Materials Cost x 2)+ Depending on the type of cleaning, regular or Hot Water.

Expenses for cleaning = Estimated cost Cold water cleaning should cost $45 to $50, whereas hot water cleaning should be $55 to $60.

For example, if the cost of materials is $200, multiply it by two to get $400.

Let’s say you’re using hot water cleaning.$400 + $60 = $460 project cost $400 + $60 = $460 project cost

How Much Does It Cost to Pressure Wash a House?

According to Home Advisor, Home Advisor says that power washing typically costs $183 to $380 in the U.S.

It usually costs between $220 and $380 to power wash a house, $130 to $220 to power wash a driveway, and $250 to $420 to power wash a deck or patio.

The price may vary depending on the surface size and any cleaning chemicals that may be needed.

Most power washers charge by the square foot, by the hour, or by the flat rate. You can find details on each of these methods above.

How Much Does It Cost to Pressure Wash per Square Foot?

The cost of pressure washing typically ranges between $0.08 and $0.35 per square foot. Your region’s average rate will determine this figure.

According to CostHelper, pressure washers charge $0.40 to $0.80 per square foot for stains, dirt, and mold that take longer to remove.

How Much Does Pressure Washing Cost per Hour?

According to Fixr.com, pressure washing typically costs $60 to $100 an hour.

It costs between $360 and $600 to pressure wash a 1,200-square-foot home.

It takes about an hour to pressure wash a driveway or sidewalk ($60 to $100), two to three hours to pressure wash a roof ($120 to $300), and one to two hours to pressure wash decks, stucco parts, porches, and patios ($60 to $200)

Frequently Asked Questions

How much should I charge to pressure wash a 2000-square-foot house?

Before setting a price for pressure washing a home, you’ll need to consider the cost of your equipment and supplies and your labor. For example, if it takes you two hours to pressure wash a 2000-square-foot home, and you charge $50 per hour, you’ll need to charge $100 for the job.

If you also factor in the cost of your equipment and supplies, you may need to charge closer to $125. Of course, your pricing will also depend on the going rate in your area. If other pressure washers in your area charge $75 per hour, you may need to adjust your price accordingly.

Ultimately, the best way to determine a cleaning solution and what to charge is to assess your costs and compare them to the rates of other pressure washers in your area.

How much should I charge to pressure wash a square foot?

A power or pressure washer will charge $0.40 to $0.80 per square foot if there are problems like stains, dirt, or mold that take longer to clean, according to CostHelper.

How long does it take to pressure wash a 2000 sq ft house?

Pressure washing in a 2000 sq ft house typically takes between two and four hours, depending on the condition of the house and the type of equipment being used.

Pressure washers with higher psi (pounds per square inch) ratings will be able to clean more quickly, but they can also damage siding and paint if not used correctly.

What is the difference between power washing and pressure washing?

A pressure washer blasts a stream of pressurized water across a surface to remove dirt and grime. Instead of using cold water, power washing uses superheated water or steam to accomplish this task. Often, the terms are used interchangeably, but heat is the only real difference.

Conclusion

Looking to pressure wash your house but don’t know how much it costs? Or, are you curious about how much power washing costs per square foot? Look no further!

In this blog, we have provided you with all the resources you need to price a power washing job and calculate the cost per hour.

Armed with this information, you’re well on finding the better option for pressure washing your house at an affordable rate. Thanks for reading!